S-Series Vacuum Sweeper

Configure to your wishes

TRILO offers contracter the best vacuum sweeper for the job. With the S-line, you will always get exactly the machine you need, because you configure it yourself. By using our product configurator you can completely configure the machine that best suits your needs and wishes.

No matter if you wish to sweep litter, leaves, debris or grass or cut fine or rough grass, the S-line offers the perfect solution for you.

Whichever capacity you need

All of the new S-line sweepers are equipped with a powerful, 6 blade fan in a TRILO centrifugal pump. The air capacity has been increased by maximising the filter surface, by enlarging the air intake and by redesigning the brush hood. The position of the spout has been altered, increasing the filling degree of the container. The S-line is available in loading capacities up to 8 to 12 m3.

Efficient and manoeuvrable combination

Key point of the new design is a compact and short container, which allows for easy manoeuvring. The new design also gives the improved brush hood and suction hose more room. The brush hood has been improved in life span, capacity, multi functionality and ease of maintenance. The boom with suction hose has been enlarged by 50% to 2.5 meter, which allows the driver to collect materials from even further away from the sweeper. The suction hose is placed closer to the sweeper which improves the sight to the rear. The boom can be placed on both sides of the machine.

Maintenance friendly

All S-line models are driven by XPB belts with automatic tighteners. The grease points have been replaced with maintenance free bearings, for example in the boom, the front rollers of the scraper floor and the hinges of the back door. The remaining grease points are easily accessible.

All functions are cabine controlled with a compact joystick.

Technical specifications

 

Fan diameter:  Ø 960mm
Number of fan blades:  6
PTO output:  > 70 hp
PTO:  540/750/1000 RPM
Drive:  Power take-off
Required hydraulics:  180 bar - 40 l/min.
Required hydraulic connections:  2x double acting minimum
Weight:  depending on configuration
Measurements (LxWxH):  depending on configuration
Air capacity:

390 m3/min.

Noise level: 85 dB(A)
Loading capacity:  8-10-12-14-16-20 m3
Wander hose: Ø 250 - 5 +1 m
Suction hose: Ø 350mm - 4 m
Working width 180-210-240-300cm
Tyres: 505/50R17 or 435

Images may not reflect dealer inventory or unit specifications.

SHOWROOM

36 Abernethy Road
Belmont 6104
Western Australia
Australia

FREE CALL

1800 248 676

P +61 8 9478 7000
F +61 8 9478 6667

Brands we stock

  • Toro
  • Hako
  • Gianni Ferrari
  • Peruzzo
  • MTD
  • Cub Cadet
  • SMG
  • WALGA

© 2018 T-Quip 2018 All Rights Reserved