SportChamp – SC3D4HL

Multifunctional ride-on machine for the advanced maintenance of artificial turf 

The new SportChamp SC3 o ffers a wide range of tasks for maintaining di fferent synthetic sports surfaces in sports facilities. By the use of di fferent attachments all synthetic sport surfaces can be cleaned and maintained according to the manufacturer’s guidelines and beyond that for an e fficient and economic upkeep of the surface. 

The operating principle of the SportChamp SC3 has not changed:

In a single operation, SportChamp levels the infill material of filled surfaces with its steerable, low-wear brush and eliminates contamination at the same time. Thus the infill material will be loosened and the fibre will be put upright again. Impurities will be vacuumed into a large-volume filter box during the surface maintenance. The robust filter unit with high pulling power is controlled automatically and cleaned within minutes. Since the filter box opens for emptying automatically, you must no longer remove it for emptying. 

With its e ffective working width of 1,100 mm, and the wide range of attachments, SC3 will facilitate and accelerate all necessary care tasks. 

The range includes attachments for the winter services and the top-dressing of infill material, for the removal of leaves, the loosening of extreme compaction and the spraying of care products. The application area of the SportChamp is enlarged by additional attachments for non-infilled artificial turf, synthetic sports surfaces or sidewalks. Thereby SC3 is the multifunctional care and maintenance machine for your sports facility. Beside the classic, weekly maintenance tasks the SMG SportChamp can additionally carry out the annual basic and deep cleaning.

The third generation of the SportChamp boasts multiple improvements. For example, the new infinitely adjustable tilt steering column that can now further modify the driver’s position in accordance with the individual body mass of the operator. With the new EcoDrive SportChamp SC3 provides full engine power, but with lower fuel consumption and significantly lower noise emissions.


Drive 3-cylinder diesel engine, water-cooled, 22 HP
Traction drive Hydrostatic, speed up to 10 km/h Hydraulic lifting device for accessory attachments and filter box; Differential lock
Capacity of tank approx. 30 litres
Brush working width depending on brush: 900 – 1,600 mm
Weight from approx. 680 kg
Dimensions L 2,800 x W 1,320 x H 1,283 mm

Images may not reflect dealer inventory or unit specifications.


36 Abernethy Road
Belmont 6104
Western Australia

Contact Us

  • This field is for validation purposes and should be left unchanged.


Brands we stock

  • Toro
  • Hako
  • Peruzzo
  • SMG

Recent Comments